Zanussi ZWF1211 User Manual download pdf (Page 11)

B

2. Adjust the flap in posi-

tion B.

3. Put back the drawer in

the recess.

When you use the liquid detergent:

• Do not use gelatinous or thick liq-

uid detergents.

• Do not put more liquid then 120

ml.

• Do not set the delay start.

A

When the flap is in posi-

tion B and you want to

use powder detergent:

1. Remove the drawer.

2. Adjust the flap in po-

sition A.

3. Put back the drawer

in the recess.

• Measure out the detergent and the fabric condi-

tioner.

• Put the detergent and the fabric conditioner into

the compartments.

• Carefully close the detergent drawer.

ACTIVATING THE APPLIANCE

Press and hold for a couple of seconds the

Ein/Aus Marche/Arrêt button to activate or

deactivate the appliance.

A tune sounds when the appliance is activated.

SETTING A PROGRAMME

1. Touch the programme button and set the

programme:

• The indicator of the button flashes

slowly.

2. If necessary, change the temperature and the

spin speed or add available options. When you

activate an option, the indicator of the set

option comes on.

If you set something incorrect, the

indicator of the button flashes red

three times.

STARTING A PROGRAMME WITHOUT THE

DELAY START

Touch the button .

• The indicator of the button

stops to

flash and stays on.

• The programme starts, the door locks, the

indicator is on.

The drain pump can operate for a

short time at the beginning of the

washing cycle.

STARTING A PROGRAMME WITH THE DELAY

START

The start of the programme can be delayed by 9, 6

or 3 hours.

1. Touch the button to choose the delay you

want to set.

The indicator of the selected delay is on.

2. Touch the button :

• The appliance starts the countdown.

• When the countdown is completed, the

programme starts automatically.

You can cancel or change the set of

the delay start before you touch the

button . After touching the button

you can only cancel the delay.

To cancel the delay start:

1. Touch the button to set the appliance to

pause.

2. Touch the button until the indicator of the

set delay goes off.

Touch the button again to start the

programme immediately.

INTERRUPTING A PROGRAMME AND

CHANGING THE OPTIONS

You can change only some options before they

operate.

1. Touch

.

The indicator of this button flashes.

2. Change the options.

3. Touch again.

The programme continues.

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Comments to this Manuals

No comments