Zanussi ZWG1120M User Manual download pdf (Page 12)

Cancelling the Delay Start after having started the

programme:

1. Set the washing machine to PAUSE by pressing

button .

2. Press button repeatedly until the display shows 0'.

3. Press button again to start the programme.

• The door will be locked throughout the delay time.

If you need to open the door, you must first set the

washing machine to PAUSE by pressing button

and wait a few minutes before opening the door.

After you have closed the door, press the same

button again.

The Delay Start cannot be selected with

the draining programme.

It is possible to change some options before the

programme carries them out.

Before you make any change, you must pause the

washing machine by pressing button 4.

Changing a running programme is possible only by

resetting it. Turn the programme selector dial to

and then to the new programme position. Start the

new programme by pressing button 4 again.

The washing water in the tub will be not emptied out.

Press the button to interrupt a programme which is

running.

Press the button again to restart the programme.

Turn the selector dial to to cancel a programme

which is running, and wait few minutes to open the

door (it is possible only if in the tub there is not

water).

The machine stops automatically.

The blinking zero appears on the display.

If a programme or an option that ends with water left

in the tub has been selected, the door is locked to

indicate that the water must be emptied out before

opening the door.

Follow the below instructions to empty out the water:

1. Turn the programme selector dial to .

2. Select the draining or spinning programme.

Important!

Altering an option or a running programme

Interrupting a programme

Cancelling a programme

At the end of the programme

3. Reduce the spin speed if needed, by pressing the

relevant button.

4. Press button .

At the end of the programme, the door is released,

after few minutes, and can be opened. Turn the

programme selector dial to to switch the machine

off.

Remove the laundry from the drum and carefully

check that the drum is empty. If you do not intend to

carry out another wash, close the water tap. Leave

the door open to prevent the formation of mildew and

unpleasant smells.

1. Once the programme has finished after a few

minutes the energy saving system will be enabled.

The brightness of the display and the indicator pilot

lights are off.

2. If the appliance is switch on but in PAUSE, only the

Stand-By:

brightness of the display is off.

By pressing any button the appliance will come out of

the energy saving status.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Zanussi ZWG1120M User Manual Page 12

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWG1120M