Zanussi ZWSH6100V User Manual download pdf (Page 11)

When you use the liquid detergent:

• Do not use gelatinous or thick liq-

uid detergents.

• Do not put more liquid detergent

than the edge of the detergent de-

vider.

• Do not set the prewash option.

• Do not set the delay start.

SETTING A PROGRAMME

1. Turn the programme knob to switch the

appliance on and set the programme:

The indicator of the button Старт/Пауза flashes.

2. If necessary, change the temperature and the

spin speed or add available options.

When you activate an option, the indicator of the

set option comes on.

If you set something incorrect, the

indicator of button Старт/Пауза

flashes red.

STARTING A PROGRAMME WITHOUT THE

DELAY START

Press the button Старт/Пауза.

The corresponding indicator stops to flash.

The phase indicator illuminates and stays on.

The programme starts and the door locks.

The drain pump can operate for a

short time at the beginning of the

washing cycle.

STARTING A PROGRAMME WITH THE DELAY

START OPTION

1. Press the button Отложенный старт repeatedly

to set the required delay.

The indicator of the set delay comes on.

2. Press the button Старт/Пауза:

• The door is locked.

• The appliance starts the countdown.

• When the countdown is completed, the

programme starts automatically.

You can cancel or change the delay

setting before you press the button

Старт/Пауза. After pressing the button

Старт/Пауза, you can only cancel the

delay.

To cancel the delay start:

a. Press the button Старт/Пауза to set the

appliance to pause.

The corresponding indicator flashes.

b. Press the button Отложенный старт once;

the indicator of the set delay goes off.

Press the button Старт/Пауза again to

start the programme immediately.

INTERRUPTING A PROGRAMME AND

CHANGING THE OPTIONS

You can change only some options before they

operate.

1. Press the button Старт/Пауза.

The indicator flashes.

2. Change the options.

3. Press the button Старт/Пауза again.

The programme continues.

CANCELLING A RUNNING PROGRAMME

1. Turn the programme knob to position ВКЛ/

ВЫКЛ to cancel the programme and to

deactivate the appliance.

2. Turn the programme knob again to activate the

appliance. Now, you can set a new washing

programme.

Before starting the new programme

the appliance could drain the water. In

this case, make sure that the detergent

is still in the detergent compartment, if

not fill the detergent again.

OPENING THE DOOR

While a programme or the delay start operates, the

appliance door is locked.

CAUTION! If the temperature and

level of the water in the drum are too

high and the drum still rotates, you

cannot open the door.

To open the door during the first minutes of the

cycle or when the delay start operates:

1. Press the button Старт/Пауза to pause the

appliance.

2. Wait some minutes until the door unlocks.

3. You can open the door.

4. Close the door and touch the button Старт/

Пауза again. The programme (or the delay)

continues.

AT THE END OF THE PROGRAMME

• The appliance stops automatically.

• The indicator of the button Старт/Пауза goes

off. The phase indicator illuminates and

stays on.

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments