Zanussi OPZB4232X User Manual download pdf (Page 22)

REPLACING THE LAMP

WARNING! Risk of electric shock.

The lamp can be hot.

1. Turn off the oven.

Wait until the oven is cooled down.

2. Disconnect the oven from the mains.

3. Put a cloth on the bottom of the cavity.

CAUTION! Always hold the halogen

lamp with a cloth to prevent grease

residue from burning on the lamp.

The back lamp

1. Turn the lamp glass cover to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C heat-

resistant lamp.

4. Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

WHAT TO DO IF...

Problem Possible cause Remedy

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The clock is not set. Set the clock.

The oven does not heat up. The necessary settings are not

set.

Make sure that the settings are

correct.

The oven does not heat up. The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

The lamp does not operate. The lamp is defective. Replace the lamp.

The turnspit does not rotate. The turnspit is not correctly in-

stalled into the turnspit hole.

Refer to "Using the turnspit".

Steam and condensation settle

on the food and in the cavity of

the oven.

You left the dish in the oven for

too long.

Do not leave the dishes in the

oven for longer than 15 - 20

minutes after the cooking

process ends.

SERVICE DATA

If you cannot find a solution to the problem yourself,

contact your dealer or an Authorised Service

Centre.

The necessary data for the service centre is on the

rating plate. The rating plate is on the front frame of

the oven cavity. Do not remove the rating plate from

the oven cavity.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Zanussi OPZB4232X User Manual Page 22

Comments to this Manuals

Related products and manuals for Cookers Zanussi OPZB4232X