Zanussi DE4654 User Manual download pdf (Page 25)

Water outlet hose connection

The end of the drain hose can be connected in the

following ways:

1. To the sink outlet spigot, securing it if necessary

with a clip.

2. Hooked over the edge of the sink using the special

curved plastic guide provided.

3. To a stand pipe provided with vent-hole, minimum

internal diameter 4 cm.

The waste connection must be at a height of between

30 cm (minimum) and 100 cm (maximum) from the

bottom of the dishwasher.

The drain hose can face either to the right or left of the

dishwasher

Ensure the hose is not bent or squashed as this could

prevent or slow down the discharge of water.

If you use a drain hose extension it must be no longer

than 2 metres and its internal diameter must be no

smaller than the diameter of the hose provided.

Likewise the internal diameter of the couplings used

for connections to the waste outlet must be no smaller

than the diameter of the hose provided.

The sink plug must not be in place when the

machine is draining as this could cause the water

to siphon back into the machine.

Electrical connection

Before plugging the appliance into the wall socket,

make sure that:

1. The mains voltage corresponds to the voltage given

in the "Technical specifications".

2. The meter, fuses, mains power supply and wall

socket can all take the maximum load required.

Make sure that the socket and plug are compatible

without having to use any type of adaptor. If

necessary, have the domestic wiring system socket

replaced.

Safety standards require the appliance to be

earthed.

The manufacture accepts no liability for

failure to observe the above safety

precautions.

This appliance complies with the following E.E.C. Directives:

- 73/23 of 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

min 30 cm

max 100 cm

min 4 cm

Ø 21

Ø 18

CS09

max 100 cm

min 30 cm

max 100 cm

+ 2 m max

CS10

Ø 18

Ø 21

Attention!

Our appliances are supplied with a

security device to protect against the

return of dirty water back into the

machine.

If the spigot of your sink has a "no return

valve" incorporated this can prevent the

correct draining of your dishwasher.

We advise you therefore to remove it.

1 2 ... 20 21 22 23 24 25 26 27

Comments to this Manuals

No comments

Zanussi DE4654 User Manual Page 25

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi DE4654