Zanussi DE6744 User Manual download pdf (Page 16)

What to do, when...

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions

given here, without calling out an engineer.

...a flashing fault code appears

The dishwasher will not start or stops during operation. All push buttons are inoperative except for the On/Off push button and a

combination of indicator lights, as indicated in the following chart, are flashing. Press the On/Off push button to switch the

dishwasher off and carry out the following suggested corrective actions.

Once the checks have been carried out, press the On/Off push button, the programme will continue from the point in which it was

interrupted. If the fault code reappears contact the consumer services department.

For other combinations of fault codes not described in the above chart will appear, please contact your consumer services

department.

Indicator lights of the

programme in progress and

"washing" phase are flashing.

The machine does not fill with

water.

Indicator lights of the

programme in progress and

"drying" phase are flashing.

The dishwasher will not drain.

Indicator lights of the

programme in progress and

"drying" and "washing" phases

are flashing.

Fault code / malfunction Possible cause Solutions

The water tap is blocked or furred with

limescale.

The water tap is turned off.

The filter (where present) in the threaded hose

fitting at the water inlet valve is blocked.

The water inlet hose has not been correctly laid

or it is bent or squashed.

Clean the water tap.

Turn the water tap on.

Clean the filter in the threaded hose

fitting.

Check the water inlet hose connection.

The siphon is blocked. Clean out the siphon.

The water drain hose has not been correctly laid

or it is bent or squashed.

Check the water drain hose connection.

Protection against flooding is active.

Close the water tap and contact the

consumer services department.

...there are problems when operating the dishwasher

The programme does not start

There is a whistling noise during

washing

Fault Possible cause Solutions

The dishwasher door has not been properly

closed.

The main plug is not plugged in.

The fuse has blown in the household fuse box.

For dishwasher models with delay start

option:

Delay start has been selected.

Close the door.

Insert the mains plug.

Replace the fuse.

If dishes are to be washed immediately,

cancel the delay start.

Use a different brand of detergent.The whistling is not a cause for concern.

1 2 ... 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Zanussi DE6744 User Manual Page 16

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi DE6744