Zanussi ZDF211 User Manual download pdf (Page 19)

CAUTION!

If the machine is connected to new pipes or pipes which have not been used for a long time, you

should run the water for a few minutes before connecting the inlet hose.

Inlet hose

Connect the inlet hose to a water tap with an

external thread of 3/4”.

The inlet hose can be turned either to the left or the

right to suit the installation by means of the locknut.

The locknut must be correctly fitted to avoid water

leaks.

Ensure that the hoses

are not kinked, crushed

or entangled.

Drain hose

- Connect drain hose to the sink. Secure it with the

supplied hose clamp.

- Required height: 30 to 100 cm above bottom of

the dishwasher.

- If you use a drain hose extension the total length

should not be longer than 4 metres. Likewise the

internal diameter of the couplings used for

connections to the waste outlet must be no

smaller than the diameter of the hose provided.

WARNING!

● Safety standards require the appliance to be

earthed. The manufacturer accepts no

liability for failure to observe the above

safety precautions.

● Prior to using the appliance for the first time,

ensure that the rated voltage and type of

Electrical connection

supply on the rating plate match that of the

supply where the appliance is to be installed.

The fuse rating is also to be found on the

rating plate.

● Always plug the mains plug into a correctly

installed shockproof socket.

156999310en.qxp 11/28/2005 2:28 PM Pagina 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

Zanussi ZDF211 User Manual Page 19