Zanussi ZDM11301WA User Manual

ENUser manualDishwasherZDM11301WA

1BA2Remove the filters Aand B from the bot-tom of the appliance.1234Fully clean the filtersbelow running water.125Put the filters back.Turn the filter

Alarm code Problem• The indicator of the set programme flashes con-tinuously.• The end indicator flashes 1 time intermittently.The appliance does not

Stains and dry water drops on glassesand dishes• The released quantity of rinse aid is not suf-ficient. Adjust the rinse aid selector to ahigher posit

13www.zanussi.com

14 www.zanussi.com

15www.zanussi.com

www.zanussi.com/shop 156975070-A-362013

ContentsSafety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

– Farm houses– By clients in hotels, motels and other resi-dential type environments– Bed and breakfast type environments.Warning! Risk of injury.• Do

Indicators DescriptionWashing phase indicator.Drying phase indicator.End indicator.Salt indicator. This indicator is off while the programme operates.

4. Open the water tap.5. Processing residues can stay in the appli-ance. Start a programme to remove them.Do not use detergent and do not load thebask

3Put 1 litre of water inthe salt container(only for the firsttime).456Caution! Water and salt can come outfrom the salt container when you fill it.Ris

Using the detergent12A3Fill the detergent dis-penser (A) with de-tergent.B4If you use a washingprogramme with pre-wash phase, putmore detergent in the

• The phase indicators of the set pro-gramme start to flash.4. Press the start button. The programmestarts.• The start indicator comes on.• Only the i

• Put hollow items (cups, glasses and pans)with the opening down.• Make sure that cutlery and dishes do notbond together. Mix spoons with other cut-l