GETTING STARTED?EASY.User ManualZDS15010WAEN User ManualDishwasher
ADDING DETERGENT212030ABIf the programme has a prewash phase, put a small quantity of detergent also in compartment B.ADDING MULTI-TABLETS212030THE AU
If the door is opened for more than 30 seconds during the drying phase, the runningprogramme will end. Press on/off button or wait for Auto OFF to dea
• Make sure that glasses do not touch otherglasses.• Put cutlery and small items in the cutlery basket.• Put light items in the upper basket. Make sur
CLEANING THE SPRAY ARMSDo not remove the spray arms. If the holes in thespray arms are clogged, remove remaining parts ofsoil with a thin pointed obje
Problem and alarm code Possible cause and solutionThe anti-flood device is on.The display shows .• Close the water tap and contact an Authorised Serv
Problem Possible cause and solutionPoor drying results. • Tableware has been left for too long inside a closed appli-ance.• There is no rinse aid or t
Problem Possible cause and solutionLimescale deposits on the table-ware, on the tub and on the in-side of the door.• The level of salt is low, check t
ENVIRONMENTAL CONCERNSRecycle the materials with the symbol . Put thepackaging in applicable containers to recycle it.Help protect the environment an
18
SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for
WWW.ZANUSSI.COM/SHOP156904242-A-422016
• Put the cutlery in the cutlery basket with the sharp endspointing down or put them in the cutlery drawer in a horizontalposition with the sharp edge
• Do not put flammable products or items that arewet with flammable products in, near or on theappliance.SERVICE• Contact the Authorised Service Centr
INDICATORSIndicator DescriptionWashing phase. It comes on when the washing phase operates.Drying phase. It comes on when the drying phase operates.Mul
ProgrammeDegree of soilType of loadProgramme phasesConsumption values1)Duration(min)Energy(kWh)Water(l) 5)All • Prewash 14 0.1 41) The pressure and th
USER MODEPress and hold simultaneously Delay and Start until the indicators , and start toflash.In user mode, the following settings can be chang
DEACTIVATING THE RINSE AID DISPENSERWhile the appliance is in user mode:1. Press Option.• The indicators and go off.• The indicator continues to
ADDING SALTBefore first use put one litre of water in the salt container.CAUTION!Water and salt can come out of the salt container when you fill it. A
Comments to this Manuals