Zanussi ZDT12002FA User Manual download pdf (Page 26)

Problem Possible cause Possible solution

The programme was not applicable

for the type of load and soil.

Make sure that the programme is ap-

plicable for the type of load and soil.

Incorrect position of the items in the

baskets. Water could not wash all

items.

Make sure that the position of the

items in the baskets is correct and that

the water can easily wash all items.

The spray arms could not turn freely. Make sure that the position of the

items in the baskets is correct and

does not cause the blockage of the

spray arms.

The quantity of detergent was not

sufficient.

Make sure that you add the correct

quantity of detergent in the dispenser

before you start a programme.

There was no detergent in the deter-

gent dispenser.

Make sure that you add detergent in

the dispenser before you start a pro-

gramme.

Limescale particles on the

dishes.

The salt container is empty. Make sure that there is dishwasher salt

in the salt container.

The set level of the water softener is

incorrect.

Make sure that the set level of the wa-

ter softener agrees with the water

hardness in your area.

The cap of the salt container is loose. Tighten the cap.

Whitish streaks and stains

or bluish layers on glasses

and dishes.

The released quantity of rinse aid is

too much.

Decrease the released quantity of

rinse aid .

The quantity of detergent was too

much.

Make sure that you add the correct

quantity of detergent in the dispenser

before you start a programme.

Dry water drop stains on

glasses and dishes.

The released quantity of rinse aid

was not sufficient .

Increase the released quantity of rinse

aid.

The quality of the detergent can be

the cause.

Try a different brand of detergent.

The dishes are wet. The programme had no drying phase. Set a programme with the drying

phase.

The dishes are wet and

matt.

The rinse aid dispenser is empty. Make sure that there is rinse aid in the

rinse aid dispenser.

The quality of the rinse aid can be the

cause.

Try a different brand of rinse aid.

Technical information

Dimensions Width / Height / Depth (mm) 596 / 818-898 / 555

Electrical connection Refer to the rating plate.

Voltage 220-240 V

Frequency 50 Hz

www.zanussi.com

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Comments to this Manuals

No comments

Zanussi ZDT12002FA User Manual Page 26

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT12002FA