Zanussi ZDT12002FA User Manual download pdf (Page 18)

Programme Degree of soil

Type of load

Programme phases Options

All Prewash

1) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

2) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy

consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.

3) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out

from the appliance.

Do not use detergent with this programme.

Programme

Duration (min) Energy (kWh) Water (l)

85-95 1,8-2,0 22-25

100-110 1,4-1,6 19-21

30 0,9 9

130-140 1,0-1,2 14-16

12 0,1 5

1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes can change the

programme duration and the consumption values.

Options

Acoustic signals

The acoustic signals operate in these conditions:

• When the programme is completed.

• A malfunction occurs to the appliance.

Factory setting: on.

You can deactivate the acoustic signals.

Deactivating the acoustic signals

1. Press the on/off button to activate the appliance.

2. Make sure that the appliance is in setting mode. Refer

to ‘SETTING AND STARTING A PROGRAMME’.

3. Press and hold the programme button until the pro-

gramme indicator (A

) flashes and the programme in-

dicator (B

) comes on.

4. Press immediately the programme button.

• The programme indicator (A

) comes on with a

fixed light.

• The programme indicator (B

) starts to flash.

5. Wait until the programme indicator (A

) goes off and

the end indicator comes on (the programme indicator

) continues to flash).

• The acoustic signals are on.

6. Press the programme button. The end indicator goes

off.

• The acoustic signals are off.

7. Deactivate the appliance to confirm.

Activating the acoustic signals

1. Refer to ‘Deactivating the acoustic signals’, step (1

)

through (4

2. Wait until the programme indicator (A

) goes off. The

end indicator is off and programme indicator (B

) con-

tinues to flash.

• The acoustic signals are off.

3. Press the programme button. The end indicator

comes on.

• The acoustic signals are on.

4. Deactivate the appliance to confirm.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Comments to this Manuals

No comments

Zanussi ZDT12002FA User Manual Page 18

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT12002FA