Zanussi ZDT12002FA User Manual download pdf (Page 26)

Problem Possible cause Possible solution

The dishes are wet. • The programme had no drying phase.

• The programme had a low tempera-

ture drying phase.

For better drying results, keep the door

ajar for some minutes.

The dishes are wet and matt. The rinse aid dispenser is empty. Make sure that there is rinse aid in the

rinse aid dispenser.

The quality of the rinse aid can be the

cause.

Try a different brand of rinse aid.

Technical information

Dimensions Width / Height / Depth (mm) 596 / 818-898 / 555

Electrical connection Refer to the rating plate.

Voltage 220-240 V

Frequency 50 Hz

Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 )

Water supply

Cold water or hot water

max. 60 °C

Capacity Place settings 12

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease

energy consumption.

Environment concerns

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please contact

your local council, your household waste disposal service

or the shop where you purchased the product.

• Discard correctly the packaging material. Recycle the

materials with the symbol

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

No comments

Zanussi ZDT12002FA User Manual Page 26