Zanussi ZDT12011FA User Manual download pdf (Page 11)

Troubleshooting

The appliance does not start or it stops during

operation.

Before you contact the Service, refer to the in-

formation that follows for a solution to the

problem.

With some problems, the end indicator

flashes intermittently to show an alarm

code.

Alarm code Problem

• The end indicator flashes 1 time intermittently.

• Acoustic signal sounds 1 time intermittently.

The appliance does not fill with water.

• The end indicator flashes 2 times intermittently.

• Acoustic signal sounds 2 times intermittently.

The appliance does not drain the water.

• The end indicator flashes 3 times intermittently.

• Acoustic signal sounds 3 times intermittently.

The anti-flood device is on.

Warning! Deactivate the appliance

before you do the checks.

Problem Possible solution

You cannot activate the appliance. Make sure that the mains plug is connected to the mains

socket.

Make sure that there is not a damaged fuse in the fuse box.

The programme does not start. Make sure that the appliance door is closed.

The appliance does not fill with water. Make sure that the water tap is open.

Make sure that the pressure of the water supply is not too

low. For this information, contact your local water authority.

Make sure that the water tap is not clogged.

Make sure that the filter in the inlet hose is not clogged.

Make sure that the inlet hose has no kinks or bends.

The appliance does not drain the water. Make sure that the sink spigot is not clogged.

Make sure that the drain hose has no kinks or bends.

The anti-flood device is on. Close the water tap and contact the Service.

After the checks are completed, activate the

appliance. The programme continues from the

point of interruption.

If the problem occurs again, contact the Serv-

ice.

If other alarm codes appear, contact the Serv-

ice.

If the washing and drying results are not

satisfactory

Whitish streaks or bluish layers on

glasses and dishes

• The released quantity of rinse aid is too

much. Adjust the rinse aid selector to a low-

er position.

• The quantity of detergent is too much.

www.zanussi.com

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Zanussi ZDT12011FA User Manual Page 11

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT12011FA