Zanussi ZDT12011FA User Manual download pdf (Page 12)

Stains and dry water drops on glasses

and dishes

• The released quantity of rinse aid is not suf-

ficient. Adjust the rinse aid selector to a

higher position.

• The quality of the detergent can be the

cause.

Dishes are wet

• The programme is without a drying phase or

with a low temperature drying phase.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the

cause.

Refer to ‘HINTS AND TIPS’ for other pos-

sible causes.

Technical information

Dimensions Width / Height / Depth (mm) 596 / 818 - 898 / 555

Electrical connection Refer to the rating plate.

Voltage 220-240 V

Frequency 50 Hz

Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 )

Water supply

Cold water or hot water

max. 60 °C

Capacity Place settings 12

Power consumption Left-on mode 0.50 W

Off-mode 0.50 W

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot

water supply to decrease energy consumption.

Rating plate

Mod. ... ... ...

Prod. No. ... ... ...

Ser. No. ...

Environment concerns

Recycle the materials with the symbol . Put

the packaging in applicable containers to

recycle it.

Help protect the environment and human

health and to recycle waste of electrical and

electronic appliances. Do not dispose

appliances marked with the symbol with the

household waste. Return the product to your

local recycling facility or contact your

municipal office.

• Discard correctly the packaging material.

Recycle the materials with the symbol

www.zanussi.com

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Zanussi ZDT12011FA User Manual Page 12

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT12011FA