ENZFU25201WAUser ManualFreezer
Problem Possible cause SolutionWater flows on the floor. The melting water outlet is notconnected to the evaporativetray above the compressor.Attach t
Some functional problems mightoccur for some types of modelswhen operating outside of thatrange. The correct operation canonly be guaranteed within th
letter “E“ or by the earth symbol orcoloured green and yellow.2. Connect the wire coloured blue to theterminal either marked with the letter “N“ orc
1235. Remove the door.6. Position the pin and the washers on theopposite side (4).4657. Unscrew the upper pin (1) and place it onthe opposite side (2)
The technical information are situated in therating plate, on the external or internal side ofthe appliance and in the energy label.ENVIRONMENT CONCER
www.zanussi.com 15
www.zanussi.com/shop280154849-B-492014
ContentsSafety information 2Safety instructions 3Product description 5Operation 5Daily use 6Care and cleaning 7Hints and tips 8Troubleshooting 8Instal
• Do not use mechanical devices or other means to acceleratethe defrosting process, other than those recommended by themanufacturer.• Do not damage th
UseWARNING!Risk of injury, burns, electrical shockor fire.• Do not change the specification of thisappliance.• Do not put electrical appliances (e.g.
Product descriptionProduct overview142351Control panel2Flaps3Freezer drawers4Rating plate5Maxibox drawersOperationControl panel1 2 3 4 51Alarm light2Q
5Temperature regulatorSwitching on1. Insert the plug into the wall socket.2. Turn the temperature regulator clockwise toa medium setting. The Power in
ThawingDeep-frozen or frozen food, prior to being used,can be thawed in the refrigerator compartmentor at room temperature, depending on the timeavail
Periods of non-operationWhen the appliance is not in use for longperiods, take the following precautions:1. Disconnect the appliance from electricitys
What to do if...Problem Possible cause SolutionThe appliance does not operate. The appliance is switched off. Switch on the appliance. The mains plug
Comments to this Manuals