Zanussi ZFU27401WA User Manual download pdf (Page 26)

4. Remove the door.

5. Unscrew the upper pin and screw it on the

opposite side.

2

1

6. Refit the door.

Make sure the edge of the door is parallel

with the edge of the top.

7. Unscrew the pin (A) and screw it on the

opposite side.

A

B

8. Remove the cap (B) and position it on the

opposite side.

9. Screw the lower hinges.

10. Refit the plinth.

11. Stand the appliance upright.

12. Fit the handle on the opposite side and put

the plastic caps (contained in the

instructions bag) in the free holes.

CAUTION!

Reposition, level the appliance, wait

for at least four hours and then

connect it to the power socket.

Do a final check to make sure that:

• All screws are tightened.

• The magnetic seal adheres to the

cabinet.

• The door opens and closes

correctly.

If the ambient temperature is cold

(i.e. in Winter), the gasket may not fit

perfectly to the cabinet. In that case,

wait for the natural fitting of the

gasket.

In case you do not want to carry out

the above mentioned operations,

contact the nearest Authorised

Service Centre. The Authorised

Service specialist will carry out the

reversibility of the doors at your cost.

Technical information

Technical data

Height mm 1850

Width mm 595

Depth mm 658

Rising time Hours 20

Voltage Volts 230 - 240

Frequency Hz 50

26 www.zanussi.com

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Comments to this Manuals

No comments