Zanussi CZF 145 W Specifications download pdf (Page 10)

Defrosting

Refrigerator

The refrigerator automatically defrosts every time the

compressor stops. The water is discharged, via the

pipe, into a tray located at the back of the appliance

above the compressor, where it evaporates.

Important

To avoid defrost water overflowing into the fridge,

periodically clean the water discharge hole in the

centre of the V shaped drip collector at the back of

the refrigerator compartment behind the salad

crispers. Use the defrost cleaner provided which you

will find already inserted into the discharge hole.

Remember to wash the defrost cleaner in hot soapy

water at regular intervals. Dry throughly before

replacing.

D037

MAINTENANCE AND CLEANING

External cleaning

Many proprietary kitchen surface cleaners

contain chemicals that can attack/damage the

plastics used in this appliance. For this reason it

is recommended that the outer casing of this

appliance is only cleaned with warm water with a

little washing-up liquid added.

An accumulation of dust will affect the performance

of the appliance and cause excessive electricity

consumption.

You MUST ensure that the appliance is switched

OFF.

Once or twice a year dust the condenser (black grill)

and the compressor at the back of the appliance,

with a brush or vacuum cleaner, see figure.

PR259

Before any maintenance or cleaning work is carried

out, DISCONNECT the appliance from the

ELECTRICITY supply.

Internal cleaning

Clean the inside and accessories with warm water

and bicarbonate of soda (5ml to 0.5 litre of water).

Rinse and dry thoroughly.

NEVER USE DETERGENTS, ABRASIVE

POWDERS, HIGHLY PERFUMED

CLEANING PRODUCTS OR WAX

POLISHES, TO CLEAN THE INTERIOR AS

THESE WILL DAMAGE THE SURFACE AND

LEAVE A STRONG ODOUR.

Changing the light bulb

Unscrew the light cover and then pull it outward

toward the middle of the cabinet. Unscrew the bulb

and replace it with a new 15 watt bulb (available

from your nearest Service Force Centre).

Replace the light cover by sliding it into its original

position and replacing the screw.

D411

When the appliance is not in use

When the appliance is not in use for long periods,

disconnect from the electricity supply, empty all

foods and clean the appliance, leaving the doors ajar

to prevent unpleasant smells.

Freezer

When the frost has reached a thickness of up to

4mm it can be removed using the ice scraper

provided with the appliance. During this operation it

is not necessary to disconnect the appliance from

the mains and remove the food. Never use metal

tools for this operation.

For complete defrosting (once or twice a year)

proceed as follows:

- turn the thermostat dial to the «OFF» position (O)

or disconnect the appliance from the mains.

- Remove any food from inside the freezer and

fridge, wrap it in several sheets of newspaper and

store in a cool,dry place.

- Leave the door open and insert the ice scraper

under the channel in the centre of the lower part

of the appliance; place a low-sided container

beneath the scraper to collect the water (see fig.).

- Clean and dry thoroughly.

- Replace the scraper in one of the drawers .

- Reconnect the appliance to the mains or reset

the thermostat to a functioning position.

- After letting the appliance run for at least half an

hour, replace the previously removed food into

the compartment.

Important

When defrosting the freezer, the fridge is also

controlled by the thermostat and will not be

operational during this period. A temperature rise of

the frozen food packs, during defrosting, may

shorten their safe storage life.

D068

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Zanussi CZF 145 W Specifications Page 10

Comments to this Manuals

Related products and manuals for Fridge-freezers Zanussi CZF 145 W