Zanussi ZBA32050SA User Manual download pdf (Page 4)

• Do not store flammable gas and liquid in the

appliance.

• Do not put flammable products or items that are

wet with flammable products in, near or on the

appliance.

• Do not touch the compressor or the condenser.

They are hot.

INTERNAL LIGHT

• The type of lamp used for this appliance is not

suitable for household room illumination

CARE AND CLEANING

WARNING! Risk of injury or damage

to the appliance.

• Before maintenance, deactivate the appliance

and disconnect the mains plug from the mains

socket.

• This appliance contains hydrocarbons in the

cooling unit. Only a qualified person must do the

maintenance and the recharging of the unit.

• Regularly examine the drain of the appliance and

if necessary, clean it. If the drain is blocked,

defrosted water collects in the bottom of the

appliance.

DISPOSAL

WARNING! Risk of injury or

suffocation.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

• Remove the door to prevent children and pets

to be closed inside of the appliance.

• The refrigerant circuit and the insulation

materials of this appliance are ozone-friendly.

• The insulation foam contains flammable gas.

Contact your municipal authority for information

on how to discard the appliance correctly.

• Do not cause damage to the part of the cooling

unit that is near the heat exchanger.

OPERATION

CONTROL PANEL

1 2

4 3

1

Temperature indicator LED

2

QuickChill indicator

3

QuickChill button

4

Temperature regulator

ON/OFF button

SWITCHING ON

1. Insert the plug into the wall socket.

2. Touch the temperature regulator button if all

LED are off.

SWITCHING OFF

Keep touching the temperature regulator button for

3 seconds.

All indicators light off.

TEMPERATURE REGULATION

To operate the appliance, touch the temperature

regulator until the LED corresponding to the

required temperature lights up. Selection is

progressive, varying from 2°C to 8°C.

Coldest setting: +2°C.

Warmest setting: +8°C.

A medium setting is generally the most

suitable.

4

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments