Zanussi ZBA32050SA User Manual download pdf (Page 4)

• This product must be serviced by an author-

ized Service Centre, and only genuine spare

parts must be used.

Environment Protection

This appliance does not contain gasses

which could damage the ozone layer, in ei-

ther its refrigerant circuit or insulation materials.

The appliance shall not be discarded together

with the urban refuse and rubbish. The insula-

tion foam contains flammable gases: the appli-

ance shall be disposed according to the appli-

cable regulations to obtain from your local au-

thorities. Avoid damaging the cooling unit, espe-

cially at the rear near the heat exchanger. The

materials used on this appliance marked by the

symbol

are recyclable.

Control panel

1 2

4 3

1

Temperature indicator LED

2

Quick Chill indicator

3

Quick Chill button

4

Temperature regulator

ON/OFF button

Switching on

Insert the plug into the wall socket.

Touch the temperature regulator button if all

LED are off.

Switching off

Keep touching the temperature regulator button

for 3 Sec.

All indicators light off.

Temperature regulation

To operate the appliance, proceed as follows:

• touch the temperature regulator button until

the LED corresponding to the required tem-

perature lights up. Selection is progressive,

varying from 2 to 8°C.

At first button touch actual setting LED keeps

blinking.

Any time the button is touch the set tempera-

ture is moved to 1 position right. Corre-

sponding LED will blink for a while.

Touch the setting button until the required

temperature is selected. The set will be fixed

coldest setting: +2°C

warmest setting: +8°C

A medium setting is generally the most suitable.

However, the exact setting should be chosen

keeping in mind that the temperature inside the

appliance depends on:

• room temperature

• how often the door is opened

• quantity of food stored

• appliance location.

QuickChill function

You can activate the QuickChill function by

pressing the QuickChill button.

The LED corresponding to the symbol Quick-

Chill indicator lights up.

You can deactivate the QuickChill function by

pressing the QuickChill button again.

The QuickChill indicator will light off.

Important!

This function stops automatically after 52 hours.

4

www.zanussi.com

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments