Zanussi ZBA32050SA User Manual download pdf (Page 8)

Installation

Caution! Read the "Safety Information"

carefully for your safety and correct

operation of the appliance before installing the

appliance.

Positioning

Warning! If you are discarding an old

appliance that has a lock or catch on the

door, you must ensure that it is made unusable

to prevent young children being trapped inside.

Important! The appliance shall have the plug

accessible after installation.

Install this appliance at a location where the am-

bient temperature corresponds to the climate

class indicated on the rating plate of the appli-

ance:

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Electrical Connection

Caution! Any electrical work required to

install this appliance should be carried out

by a qualified electrician or competent person.

Warning! This appliance must be earthed.

The manufacturer declines any liability

should these safety measures not be observed.

AB

C

D

E

Important! The wires in the mains lead are

coloured in accordance with the following code:

A Green and Yellow: Earth

C Brown: Live

D Blue: Neutral

As the colours of the wires in the mains lead of

this appliance may not correspond with the col-

oured markings identifying the terminals in your

plug, proceed as follows:

1. Connect the wire coloured green and yel-

low to the terminal marked either with the

letter “E“ or by the earth symbol

or col-

oured green and yellow.

2. Connect the wire coloured blue to the ter-

minal either marked with the letter “N“ or

coloured black.

3. Connect the wire coloured brown to the

terminal either marked with the “L“ or col-

oured red.

4. Check that no cut, or stray strands of wire

is present and the cord clamp E is secure

over the outer sheath.

5. Make sure the electricity supply voltage is

the same as that indicated on the appliance

rating plate.

8

www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comments to this Manuals

No comments