Zanussi ZU9145 User Manual download pdf (Page 8)

CUSTOMER SERVICE AND

SPARE PARTS

The technical data is indicated in the rating plate on the right side inside the appliance.

Height 815 mm

Width 560 mm

Depth 538 mm

TECHNICAL SPECIFICATIONS

If the appliance is not functioning properly, check that:

the plug is firmly in the wall socket and the mains

power switch is on;

there is an electricity supply (find out by plugging in

another appliance);

the thermostat knob is in the correct position.

If there are water drops on the bottom of the cabinet,

check that the defrost water drain opening is not

obstructed (see "Defrosting" section).

If your appliance is still not working properly after

making the above checks, contact the nearest service

centre.

To obtain fast service, it is essential that when

you apply for it you specify the model and serial

number of your appliance which can be found on

the guarantee certificate or on the rating plate

located inside the appliance, on the bottom right-

hand side.

INSTALLATION

lf this appliance featuring magnetic door seals is

to replace an older appliance having a spring lock

(latch) on the door or lid, be sure to make that

spring lock unusable before you discard the old

appliance. This will prevent it from becoming a

death-trap for a child.

Positioning

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc.

Best performance is obtained with ambient

temperature between +18°C and +43°C (class T);

+18°C and +38°C (class ST); +16°C and +32°C

(class N); +10°C and +32°C (class SN).

The class of your appliance is shown on its rating

plate.

Attention!

It must be possible to disconnect the appliance

from the mains power supply; the plug must

therefore be easily accessible after installation.

For building-in and door reversibility refer to the

relevant instructions.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply.

Voltage can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

Important

The appliance must be earthed.

The power supply cable plug is provided with a

contact for this purpose.

If the domestic power supply socket is not

earthed. connect the appliance to a separate

earth in compliance with current regulations,

consulting a specialist technician.

The Manufacturer declines all responsibility if the

above safety precautions are not observed.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Zanussi ZU9145 User Manual Page 8

Comments to this Manuals

Related products and manuals for Fridges Zanussi ZU9145