Zanussi ZCG612J1XA User Manual

GETTING STARTED?EASY.User ManualZCG612J1XAEN User ManualCookerQA

PERIODIC MAINTENANCESpeak to your local Authorised Service Centreperiodically to check the conditions of the gassupply pipe and the pressure adjuster,

3. At the same time push the knob for the ovenfunctions and turn it counterclockwise to themaximum gas flow position.4. When the flame comes on, keep

OVEN - CLOCK FUNCTIONSMINUTE MINDERUse it to set a countdown time.This function has no effect on theoperation of the appliance.Turn the knob for the t

5. Install the first fork on the spit, then put themeat on the turnspit and install the second fork.Make sure that the meat is in the middle of thespi

• Leave the meat for approximately 15 minutesbefore carving so that the juice does not seepout.• To prevent too much smoke in the oven duringroasting,

Food Quantity (g)Thermo-stat posi-tionTime (min)Shelf po-sitionAccessoriesCheese cake 2600 3 80 - 90 3 aluminium baking trayCheese cake 2600 3 70 - 80

Food Quantity (g)Thermo-stat posi-tionTime (min)Shelf po-sitionAccessoriesButtered cake5) 600 3 20 - 25 3 baking tray1) Preheat the oven for 10 minute

1. Open the door fully and hold the two doorhinges.2. Lift and turn the levers on the two hinges.3. Close the oven door halfway to the firstopening po

When the cleaning is completed, install the glasspanel and the oven door. Do the above steps in theopposite sequence.Make sure that you install the in

Problem Possible cause RemedyThe flame colour is orange oryellow. The flame can look orange oryellow in some areas of theburner. This is normal.The o

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

ACDDBMinimum distancesDimension mmA 400B 650Dimension mmC 150D 20TECHNICAL DATAVoltage 240 VFrequency 50 HzAppliance class 1Dimension mmHeight 857Widt

BURNERNORMAL POWERkW1)REDUCED POWER kW1)INJECTOR MARK1/100 mmAuxiliary 1.0 0.35 70Oven 2.7 0.90 120Grill 1.9 - 1081) Type of tap depends on model.GAS

FLEXIBLE NONMETAL PIPES CONNECTIONIf you have an easy access to the connection, youcan use a flexible pipe. The flexible pipe must betightly attached

ADJUSTING THE MINIMUM GAS LEVEL ONTHE HOB BURNER1. Disconnect the appliance from the electricity.2. Remove the knob for the hob. If there is noaccess

5. Release the burner injector D with a 7 mmsocket spanner and replace it with a differentone.Assemble the burner in a revers sequence.Replace the gas

This appliance is supplied with a main plug and amain cable.WARNING! The power cable mustnot touch the part of the applianceshaded in the illustration

26

27

WWW.ZANUSSI.COM/SHOP867342199-A-412017

• WARNING: Unattended cooking on a hob with fat or oil can bedangerous and may result in fire.• NEVER try to extinguish a fire with water, but switch

SAFETY INSTRUCTIONSThis appliance is suitable for the following markets:QAINSTALLATIONWARNING! Only a qualified personmust install this appliance.• Re

WARNING! Risk of fire and explosion• Fats and oil when heated can release flammablevapours. Keep flames or heated objects awayfrom fats and oils when

INTERNAL LIGHTINGWARNING! Risk of electric shock.• The type of light bulb or halogen lamp used forthis appliance is for household appliances only.Do n

COOKING SURFACE LAYOUT1 2 35 41Auxiliary burner2Steam outlet - number and position depend onthe model3Semi-rapid burner4Semi-rapid burner5Rapid burner

HOB - DAILY USEWARNING! Refer to Safety chapters.IGNITION OF THE HOB BURNERAlways light the burner before you puton the cookware.WARNING! Be very care

COOKWAREWARNING! Do not put the same panon two burners.WARNING! Do not put unstable ordamaged pots on the burner toprevent from spill and injury.CAUTI