Zanussi ZDK320X User Manual download pdf (Page 11)

connected to the terminal block label with "N". The

brown (or black) phase cable (fitted in the terminal

block contact marked with "L") must always be con-

nected to the live phase.

Replacement of the connection cable

To replace the connection cable use only H05V2V2-F T90

type. Make sure that the cable section is applicable to the

voltage and the working temperature. The yellow/green

earth wire must be approximately 2 cm. longer than the

brown (or black) phase wire.

Assembly

55 mm

30 mm

min. 650 mm

490 mm

min. 100 mm

270 mm

40-50 mm

A - seal to remove

B - supplied brackets

Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must be easy to remove

and let an easy access in case a technical assistance in-

tervention is necessary.

min 20 mm

(max 150 mm)

30 mm

60 mm

a) Removable panel

b) Space for connections

Kitchen unit with oven

The hob recess dimensions must obey the indication and

must be equipped with brackets to let a continuous supply

of air for safety reasons. The electrical connection of the

hob and the oven must be installed separately. It also lets

the oven to be easily taken off the unit.

50 cm

360 cm

180 cm

120 cm

MANUFACTURER:

ELECTROLUX ITALIA S.p.A.

C.so Lino Zanussi, 30

33080 PORCIA (PN) - ITALIA

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Comments to this Manuals

No comments

Zanussi ZDK320X User Manual Page 11

Comments to this Manuals

Related products and manuals for Hobs Zanussi ZDK320X