Zanussi ZDK320X User Manual download pdf (Page 12)

Description of the appliance

Cooking surface layout

180

145

1 Rear cooking zone 1700 W

2 Front cooking zone 1200 W

3 Power indicator

4 Control knobs

Electric cooking zones control knobs

Symbol Function

0 off position

Symbol Function

1 minimum heat

6 maximum heat

Operating the appliance

To switch on and increase the heat setting turn the knob

counterclockwise. To decrease the heat setting turn the

knob clockwise. To switch off turn the knob to the 0.

Power indicator is activated when either of the zones are

turned on, and will stay on until the cooking zones are

switched off.

Before first use

Set the maximum position and run the hob for 10 minutes,

to burn off any residues of manufacturing. After that run

hob at minimum position for 20 minutes. During this pe-

riod an odour and smoke can be emitted. This is normal.

Make sure the airflow is sufficient.

When a cooking zone operates, it hums for a short

time. This is typical of all ceramic glass cooking

zones and does not show that the appliance operates in-

correctly.

Helpful hints and tips

Cookware

• The bottom of the cookware must be as thick and

flat as possible.

• Cookware made of enamelled steel and with aluminium

or copper bottoms can cause discoloration on glass

ceramic surface.

Energy saving

• If possible, always put the lids on the cookware.

• Put cookware on a cooking zone before you start

it.

• Stop the cooking zones before the end of the cooking

time to use residual heat.

• The bottom of pans and cooking zones must have the

same dimension.

Use pots and pans with bottom applicable to the

dimension of burner.

Cooking area Diameters of cookware

Front max. 145 mm

Rear max. 180 mm

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Comments to this Manuals

No comments

Zanussi ZDK320X User Manual Page 12

Comments to this Manuals

Related products and manuals for Hobs Zanussi ZDK320X