Zanussi ZEM6740FBA User Manual download pdf (Page 9)

for 4 seconds. comes on. Deactivate the

hob with .

To override the function for only one

cooking time: activate the hob with .

comes on. Touch for 4 seconds. Set the

heat setting in 10 seconds. You can operate

the hob. When you deactivate the hob with

the function operates again.

Power management function

• Cooking zones are grouped according to the

location and number of the phases in the

hob. See the illustration.

• Each phase has a maximum electricity

loading of 3700 W.

• The function divides the power between

cooking zones connected to the same

phase.

• The function activates when the total

electricity loading of the cooking zones

connected to a single phase exceeds 3700

W.

• The function decreases the power to the

other cooking zones connected to the same

phase.

• The heat setting display of the reduced

zones changes between two levels.

Hints and tips

WARNING!

Refer to Safety chapters.

Cookware

For induction cooking zones a

strong electro-magnetic field creates

the heat in the cookware very

quickly.

Use the induction cooking zones

with correct cookware.

Cookware material

• correct: cast iron, steel, enamelled steel,

stainless steel, the bottom made of multi-

layer (with correct mark from a

manufacturer).

• not correct: aluminium, copper, brass,

glass, ceramic, porcelain.

Cookware is correct for an induction hob

if:

• some water boils very quickly on a zone set

to the highest heat setting.

• a magnet pulls on to the bottom of the

cookware.

The bottom of the cookware must be

as thick and flat as possible.

Cookware dimensions

Induction cooking zones adapt to the dimension

of the bottom of the cookware automatically to

some limit.

The cooking zone efficiency is related to the

diameter of the cookware. The cookware with a

smaller diameter than the minimum receives

only a part of the power generated by the

cooking zone.

Refer to “Technical information”

chapter.

The noises during operation

If you can hear:

• crack noise: cookware is made of different

materials (sandwich construction).

• whistle sound: you the cooking zone with

high power level and the cookware is made

of different materials (sandwich

construction).

• humming: you use high power level.

• clicking: electric switching occurs.

www.zanussi.com 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments