Zanussi ZEV6340XBA User Manual download pdf (Page 17)

Residual heat indicator

Warning!

The risk of burns from

residual heat!

Daily use

Warning! Refer to the Safety chapters.

Activation and deactivation

Touch

for 1 second to activate or deactivate

the appliance.

Automatic Switch Off

The function deactivates the appliance

automatically if:

•

All cooking zones are deactivated (

).

• You do not set the heat setting after you acti-

vate the appliance.

• You spill something or put something on the

control panel for more than 10 seconds, (a

pan, a cloth, etc.). An acoustic signal sound

some time and the appliance deactivates. Re-

move the object or clean the control panel.

• You do not deactivate a cooking zone or

change the heat setting. After some time

comes on and the appliance deactivates. See

below.

• The relation between heat setting and times

of the Automatic Switch Off function:

•

, - — 6 hours

•

- — 5 hours

•

— 4 hours

•

- — 1.5 hours

The heat setting

Touch

to increase the heat setting. Touch

to decrease the heat setting. The display shows

the heat setting. Touch and at the same

time to deactivate the cooking zone.

The Child Safety Device

This function prevents an accidental operation

of the appliance.

To activate The Child Safety Device

•

Activate the appliance with

. Do not set

the heat settings.

•

Touch

of the two front cooking zones for

4 seconds. The symbol

comes on.

•

Deactivate the appliance with

.

To deactivate The Child Safety Device

•

Activate the appliance with

. Do not set

the heat settings. Touch

of the two front

cooking zones for 4 seconds. The symbol

comes on.

•

Deactivate the appliance with

.

To override The Child Safety Device for

only one cooking time

•

Activate the appliance with

. The symbol

comes on.

•

Touch

of the two front cooking zones for

4 seconds. Set the heat setting in 10 sec-

onds. You can operate the appliance.

•

When you deactivate the appliance with

,

The Child Safety Device operates again.

Helpful hints and tips

Cookware

Information about the cookware

• The bottom of the cookware must be as thick

and flat as possible.

• Cookware made of enamelled steel and with

aluminium or copper bottoms can cause the

colour change on the glass-ceramic surface.

Energy saving

How to save energy

17

www.zanussi.com

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Comments to this Manuals

No comments