GETTING STARTED?EASY.User ManualZGG35214XAEN User ManualHobGB IE SA
PRODUCT DESCRIPTIONCOOKING SURFACE LAYOUT1231Rapid burner2Auxiliary burner3Control knobsCONTROL KNOBSymbol Descriptionno gas supply / off positionigni
B. Burner crownC. Ignition candleD. ThermocoupleIGNITION OF THE BURNERAlways light the burner before you puton the cookware.WARNING! Be very careful w
DIAMETERS OF COOKWAREUse cookware with diametersapplicable to the size of burners.BurnerDiameter of cook-ware (mm)Rapid 180 - 240BurnerDiameter of coo
TROUBLESHOOTINGWARNING! Refer to Safety chapters.WHAT TO DO IF...Problem Possible cause RemedyThere is no spark when you tryto activate the spark gene
LABELS SUPPLIED WITH THE ACCESSORIESBAGStick the adhesive labels as indicated below:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.03
OTHER TECHNICAL DATATOTAL POWER:Gas original: G20 (2H) 20 mbar = 4,0 kWGas replacement: G30 (3+) 28-30 mbar = 276 g/hG31 (3+) 37 mbar = 271 g/hElectri
• When you heat up water, use only the amount you need.• If it is possible, always put the lids on the cookware.• When the liquid starts to boil, turn
SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for
WWW.ZANUSSI.COM/SHOP867329000-C-452018Made in Italy
• CAUTION: The cooking process has to be supervised. A shortterm cooking process has to be supervised continuously.• WARNING: Danger of fire: Do not s
• The underside of the appliance can get hotwhen in use. If an oven has not been fittedunderneath the hob and underside of theappliance is accessible
• Used oil, that can contain food remnants, cancause fire at a lower temperature than oil usedfor the first time.• Do not put flammable products or it
B.S. 6172/B.S. 5440, Par. 2 and B.S. 6891Current Editions.The hob should not be installed in a bed sittingroom with a volume of less than 20 m³. If it
gas supply. You can find this plate in thepackage supplied with the appliance.If the supply gas pressure is changeable ordifferent from the necessary
To replace the connection cable useonly H03V2V2-F T90 or equivalenttype. Make sure that the cable sectionis applicable to the voltage load andthe work
6.7.8.9.AB10.11.INSTALLATION OF MORE THAN ONE HOBIf several hobs are to be installed side by side intothe same cut out, an assembly kit including asup
Comments to this Manuals