ENUser manualHobZGG62414IE GB CY
ABCA) End of shaft with nutB) WasherC) ElbowConnection to the gas supply should be witheither rigid or semi-rigid pipe, i.e. steel or cop-per.The conn
• The appliance must not be connected withan extension cable, an adapter or a multiplesocket. There is a risk of fire.• Do not let the power cable to
To replace the connection cable use onlyH05V2V2-F T90 or equivalent type. Makesure that the cable section is applicable to thevoltage load and the wor
Technical informationHob dimensionsWidth: 580 mmLength: 500 mmHob recess dimensionsWidth: 550 mmLength: 470 mmHeat inputRapid burner: 3.0 kWSemi-rapid
BURNERNORMALPOWERRE-DUCEDPOWERNORMAL POWERNATURAL GASG20 (2H) 20 mbarLPG(Butane/Propane) G30/G31 (3+)28-30/37 mbarkW kWinj. 1/100mmm³/hinj. 1/100mmG30
15www.zanussi.com
www.zanussi.com/shop 397226001-B-392012
ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Product description _ _ _ _ _ _ _ _ _ _ _ _
• Unattended cooking on a hob with fat or oil can be dangerousand may result in fire.• Never try to extinguish a fire with water, but switch off the a
moved from the holder), earth leakage tripsand contactors.Gas connection• All gas connections should be made by aqualified person.• Make sure that the
Product descriptionCooking surface layout1 25 4 31Semi-rapid burner2Semi-rapid burner3Control knobs4Auxiliary burner5Rapid burnerControl knobsSymbol D
ABCDA) Burner capB) Burner crownC) Ignition candleD) ThermocoupleWarning! Do not keep the control knobpushed for more than 15 seconds.If the burner do
Care and cleaningWarning! Refer to the Safety chapters.Warning! Deactivate the appliance andlet it cool down before you clean it.Disconnect the applia
Problem Possible cause Remedy • Burner cap and crown areplaced uneven• Make sure that the burner capand crown are in correct posi-tions.The flame is
InstallationWarning! Refer to the Safety chapters.Warning! The gas settings of thisappliance are not applicable for Cyprus. Ifyou install this applian
Comments to this Manuals