Zanussi ZGO63414BA User Manual download pdf (Page 8)

CAUTION!

Make sure that the pots are placed

centrally on the burner in order to

get maximum stability and to get

lower gas consumption.

CAUTION!

Liquids spilt during cooking can

cause the glass to break.

Diameters of cookware

Use cookware with diameters

applicable to the size of burners.

Burner Diameter of

cookware

(mm)

Rapid 180 - 260

Semi-rapid 120 - 220

Auxiliary 80 - 180

Care and cleaning

WARNING!

Refer to Safety chapters.

General information

• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface have

no effect on how the hob operates.

• Use a special cleaner applicable for the

surface of the hob.

WARNING!

Do not use knives, scrapers or

similar instruments to clean the

surface of the glass or between the

rims of the burners and the frame (if

applicable).

• Wash stainless steel parts with water, and

then dry them with a soft cloth.

Pan supports

The pan supports are not resistant

to washing in a dishwasher. They

must be washed by hand.

1. Remove the pan supports to easily clean

the hob.

Be very careful when you

replace the pan supports to

prevent the hob top from

damage.

2. The enamel coating occasionally can have

rough edges, so be careful when you wash

the pan supports by hand and dry them. If

necessary, remove stubborn stains with a

paste cleaner.

3. After you clean the pan supports, make sure

that they are in correct positions.

4. For the burner to operate correctly, make

sure that the arms of the pan supports are

aligned with the centre of the burner.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not, the

dirt can cause damage to the hob.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat stains,

shiny metallic discoloration. Clean the hob

with a moist cloth and some detergent. After

cleaning, rub the hob dry with a soft cloth.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy water

and dry them carefully before you put them

back.

Cleaning the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode. Keep

these components well clean to prevent difficult

lighting and check that the burner crown holes

are not obstructed.

Periodic maintenance

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas

supply pipe and the pressure adjuster, if fitted.

8 www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comments to this Manuals

No comments