Zanussi ZOP27901XE User Manual download pdf (Page 20)

Press or turn the knob for the temperature to

start the procedure.

You can use the End function to delay the start

of the cleaning procedure.

During the Pyrolysis the oven lamp is off.

5. When the oven is at its set temperature, the

door locks. The display shows the symbol

and the bars of the heat indicator until

the door unlocks.

To stop Pyrolysis before it is completed,

turn the knob for the oven functions to the

off position.

6. When Pyrolysis is completed, the display

shows the time of day. The oven door stays

locked.

7. When the appliance is cool again, an

acoustic signal sounds and the door

unlocks.

Cleaning reminder

To remind you that the Pyrolysis is necessary,

PYR flashes in the display for 10 seconds after

each activation and deactivation of the

appliance.

The cleaning reminder goes out:

• after the end of the Pyrolysis

function.

• if you press and at the

same time while PYR flashes in

the display.

Cleaning the oven door

The oven door has three glass panels.You can

remove the oven door and the internal glass

panels to clean them.

The oven door can close if you try to

remove the glass panels before you

remove the oven door.

CAUTION!

Do not use the appliance without the

glass panels.

Open the door fully

and hold the two

door hinges.

1

Lift and turn the

levers on the two

hinges.

2

Close the oven door

halfway to the first

opening position.

Then pull forward and

remove the door from

its seat.

3

Put the door on a soft

cloth on a stable

surface.

4

2

B

1

Hold the door trim (B) on the top edge of the

door at the two sides and push inwards to

release the clip seal. Pull the door trim to the

front to remove it.

Hold the door glass panels by their top edge

and carefully pull them out one by one. Start

20 www.zanussi.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Comments to this Manuals

No comments