Zanussi ZKC6020 User Manual download pdf (Page 30)

30

WARNING!

If the door glass panel becomes chipped or

has deep scratches the glass will be

weakened and must be replaced to prevent

the possibility of the panel shattering.

Please contact your local service force

centre who will be pleased to advise further.

To replace the door glass

To ensure the glass is properly located the text

should be facing towards you at the top edge of

the door and facing into the cavity.

Holding the glass with both hands, gently slide

the glass into the side trims of the oven door.

Always ensure that the glass is returned to the

same side trim it was removed from.

To replace the trim, line up the clips on the

underside of the trim with the connectors at the

top of the door.

Carefully slide the trim towards the door.

Ensure the trim is securely in place before

closing the oven door.

WARNING!

Do not attempt to use the oven without the

glass being in place.

To clean the glass door panels

Clean the inner glass door panels using hot

soapy water, hob cleaner may also be used. Do

not use hob cleaner on the stainless steel or

painted surfaces. Ensure that all parts are well

rinsed and thoroughly dried before attempting to

replace the glass.

Replacing an oven light bulb

• The type of bulb required is a 300°C 25 watt

small Edison Screw.

WARNING!

Disconnect the appliance from the electricity

supply before replacing the bulb.

• Make sure the appliance is cool before

replacing the bulb.

• Open the door and remove the shelves.

• Remove the glass cover by turning it to the

left.

• Unscrew the bulb by turning it to the left.

• Fit a new bulb and then replace the glass

bulb cover.

• Replace the shelves.

• Restore the electricity supply and reset the

time of day.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Comments to this Manuals

No comments