Zanussi W1002 User Manual download pdf (Page 15)

ENGLISH

4. Depress button if required

5. Select the temperature

Turn the dial to the required setting.

6. Select the required programme

Turn the programme selector dial clockwise to the

desired position.

7. Start the machine

Depress the ON/OFF button: the mains-on light will

illuminate and the machine starts operating.

P0080

M0046

M0045

Operating sequence

Washing only

Before washing your first load of laundry, we

recommend that you run a cotton cycle at 60°C, with

the machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment .

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked .

3. Measure out the additive

If required, pour fabric softener into the compartment

marked , without exceeding the «MAX» mark.

C0065

C0064

P0004

132998720•gb.qxd 26-01-2001 11:07 Pagina 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

Zanussi W1002 User Manual Page 15