Zanussi ZDE46201W User Manual download pdf (Page 9)

perfectly, the fluff filter must be cleaned after

every drying cycle.

The warning light FILTER , is on to remind you

this operation.

Caution! Never operate the dryer without

fluff filter or with damaged or blocked fluff

filter.

1. Open loading

door and re-

move laundry.

2. Remove the

filter which is

built into the

lower part of

the loading

aperture.

3. Open the filter

pressing the

button, among

two slots on

fingers. Clean

the filter using

dump hand or

cloth. After a

period of time,

a patina due to detergent residue on laun-

dry forms on the filters. When this occurs,

clean the filter with warm water using a

brush.

Close the filter and do not forget to put it

back.

Warning! Before You place the filter,

please check it there is nothing inside the

filter seat.

4. The filter can be positioned only to one

side. If position is wrong, the filter over-

hangs.

If the filter will not snap into place, the

loading door cannot be closed.

Cleaning the door

Clean periodically the interior part of the door

to remove any fluff. Accurate cleaning ensures

correct drying.

Cleaning the drum

Caution! Do not use abrasives or steel

wool to clean the drum.

Lime in the water or cleaning agents may

form a barely visible lining on the inside of

the drum. The degree to which the laundry has

been dried is then no longer detected reliably.

The laundry is damper than expected when re-

moved from the dryer.

Use a standard domestic cleaner (e.g. vinegar-

based cleaner) to wipe down the inside of the

drum and drum ribs.

Cleaning the control panel and housing

Caution! Do not use furniture cleaners or

aggressive cleaning agents to clean the

machine.

Use a damp cloth to wipe down the control

panel and housing.

What to do if ...

Problem Possible cause Remedy

Dryer does not work.

Mains plug is not plugged in or

fuse is not working correctly.

Plug in at mains socket. Check

fuse in fuse box (domestic instal-

lation).

Loading door is open. Close loading door.

Have you pressed the START

PAUSE button?

Press the START PAUSE button

again.

9

www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments