Zanussi ZWT71401WA User Manual

GETTING STARTED?EASY.User ManualZWT 71401 WAEN User ManualWasher Dryer

Dryness Level Type of fabric Load (kg)Spinspeed(rpm)Suggestedduration(mins)Cupboard DryFor items to be storedSynthetics and mixed fab-rics(jumpers, bl

• The drum turns regularly to prevent the laundrycreases.• The door stays locked. You must drain the waterto unlock the door.To drain the water refer

BEFORE FIRST USE1. Put 2 litre of water in the detergentcompartment for washing phase.This activates the drain system.2. Put a small quantity of deter

• When the countdown is completed, theprogramme starts automatically.You can cancel or change the set ofthe Delay Start option before youpress the but

• The acoustic signal operates (if it is activated).• In the display comes on.• The indicator of the button Start/Pause goes off.• The door lock ind

1. Turn the programme knob to position todeactivate the appliance.After some minutes from the end of the programme,the energy saving function automa

HINTS AND TIPSTHE LAUNDRY LOAD• Divide the laundry in: white, coloured,synthetics, delicates and wool.• Obey the washing instructions that are on thel

• Fabrics with residue of hair sprays, nail solventsor similar.• Garments with foam-rubber or materials similarto foam-rubber.GARMENT LABELSWhen you d

• Remove the top part ofthe additive compart-ment to aid cleaning.• Make sure that allwashing powder resi-due is removed fromthe upper and lowerpart o

CLEANING THE INLET HOSE AND THE VALVEFILTERIf the appliance doesn't fill, take long to fill withwater, the starting button blinks or the display

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

First try to find a solution to the problem (refer tothe table). If the problem persists, contact theAuthorised Service Centre.With some problems, the

Problem Possible solutionYou cannot open the appli-ance door.• Make sure that the washing programme is finished.• Set the drain or the spin programme

UNPACKINGRemove all transit bolts and packingbefore you use the appliance. You areadvised to keep all transit devices so that they can be refitted if

45˚35˚• Connect the hosewith the angled con-nection to the ma-chine. Do not placethe inlet hose down-wards.• Angle the hose to theleft or right depend

BUILDING INOVERVIEWThis appliance has been designed to be built intothe kitchen furniture. The recess should have thedimensions shown in the picture b

The hinges can be adjusted to compensate forpossible uneven thickness of the door.BATo align the door perfectly, loosen the screw, adjustthe door and

Level of protection against ingress of solid particles andmoisture ensured by the protective cover, except wherethe low voltage equipment has no prote

27

WWW.ZANUSSI.COM/SHOP132905082-A-512015

• Connect the mains plug to the mains socket only at the end ofthe installation process. Make sure that the mains plug isaccessible after installation

• Fabric softeners, or similar products, should only be used asspecified by the product manufacturer’s instructions.• Remove all objects from items th

• Before connection to new pipes, pipes not usedfor a long time, where repair work has beencarried out or new devices fitted (water meters,etc.), let

CHILD SAFETYThis device prevents children or pets to be closedin the drum.• Turn the device clock-wise, until the grooveis horizontal.You cannot close

DISPLAYBAThe display shows:A. Child lock indicatorThis device permits you to leave the applianceunattended during it's functioning (see «ChildLoc

ProgrammeTemperature rangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)9 - 12Synthetics60°C - 40°C -30°C - Cold 3.5

ProgrammeTemperature rangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)24Spin7 kg1400 rpmTo spin and drain the wate