Zanussi FE1014N User Manual download pdf (Page 11)

ENGLISH

Important! If you accidentally press the RESET

button more than once, the programme is

cancelled. To cause the washing machine to

drain the water, select any washing programme

by means of the FABRIC button, then press

RESET three times in order to select the DRAIN

position (only the DRAIN light will remain

lit).

6 OPTIONS button

Press this button to select the following options:

• PREWASH: select this option if you wish your

laundry to be prewashed before the main wash

(not available for wool).

The prewash ends with a short spin in

programmes for cotton and synthetic fabrics,

whereas in the programme for delicate fabrics the

water is only drained.

• SUPER RINSE: this option can be selected with

all programmes except the wool programme.

The machine performs 4 rinses instead of 3. This

option is recommended for people who are

allergic to detergents, and in areas where the

water is very soft.

• QUICK WASH: to be used for lightly soiled

laundry (not for wool).

The washing time will be reduced according to the

type of fabric and the selected temperature.

Important: PREWASH and SUPER RINSE can be

selected together. Press the button until both lights

light up.

7 START/PAUSE button

This button has three functions:

• Start: after you have selected the desired

programme and options, press this button to start

the washing machine. The light above the button

will stop flashing and remain lit.

• Pause: when you press this button again, the

programme in progress is interrupted. The light

above the button will start flashing. To restart the

programme, press the button again.

When you PAUSE the cycle, the DOOR LOCKED

light goes out, and it becomes possible to open

the door, provided

• the washing machine is not in the heating phase;

• the level of the water is not high;

• the drum is not turning.

Important! You must set the washing machine to

PAUSE before you make any change in the

programme in progress.

• Draining of water and spinning after the

execution of programmes with the RINSE HOLD

option.

8 SKIP/RESET button

At the end of a programme, you must press this

button once or repeatedly, in order to clear the

contents of the memory; otherwise, the next time

you switch the washing machine on, the audible

warning signals relevant to the end of the previous

cycle will be given.

You can also press the RESET button to exclude

one or several phases of the programme which is

running, as indicated below.

- set the washing machine to PAUSE by pressing

the START/PAUSE button (the relevant light will

flash);

- press the RESET button once or several

times, until the required phase(s) is(are) cancelled

(the light next to the name of the phase(s) will go out).

132996790.qxd 10/12/01 12:20 PM Pagina 11 (Nero/Process Black pellicola)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 91 92

Comments to this Manuals

No comments

Zanussi FE1014N User Manual Page 11

Comments to this Manuals

Related products and manuals for Washing machines Zanussi FE1014N