Zanussi FE1014N User Manual download pdf (Page 21)

ENGLISH

5. Water inlet filter

If you notice that the machine is taking longer to fill,

check that the filter in the water inlet hose is not

blocked.

Turn off the water tap.

Unscrew the hose from the tap.

Clean the filter with a stiff brush.

Screw the hose back onto the tap.

6. Emergency emptying out

If the water is not discharged (outlet pump is

blocked, filter or drain pipe are clogged), proceed as

follows to empty out the machine:

• pull out the plug from the power socket;

• close the water tap;

• if necessary, wait until the water has cooled down;

• place a bowl on the floor;

• put the drain hose end into the bowl and let the

water come out.

Should it not be possible to have access to the drain

hose because, for example, the appliance is built in

the kitchen furniture, slightly loosen the drain filter

after placing a bowl on the floor, to let the water

come out slowly.

At the end screw the filter again.

P1090

The dangers of freezing

If the machine is exposed to temperatures below

0°C, certain precautions should be taken.

●

Turn off the water tap.

●

Unscrew the inlet hose.

●

Unhook the drain hose from the rear support and

position the end of this hose and that of the inlet

hose in a bowl. Run the draining programme.

To do this:

●

Switch the machine on

●

Select a washing programme

●

Press the RESET button three times

●

Press START/PAUSE button

●

Disconnect the appliance.

●

Screw the inlet hose and reposition the drain

hose.

●

When you intend to start the machine up again,

make sure that the room temperature is above

0°C.

132996790.qxd 10/12/01 12:20 PM Pagina 21 (Nero/Process Black pellicola)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 91 92

Comments to this Manuals

No comments

Zanussi FE1014N User Manual Page 21

Comments to this Manuals

Related products and manuals for Washing machines Zanussi FE1014N