Zanussi WD15INPUT User Manual download pdf (Page 21)

ENGLISH

10. Start the programme

To start the selected programme, press the

START/PAUSE button; the display stops

flashing and the door pilot light comes on to

indicate that the door locking device is engaged.

The programme starts after about 30 seconds.

11. Store the programme

The wash programme selected can now be

stored by pressing one of the MEMORY buttons

until the corresponding pilot light comes on.

12. At the end of the programme

The machine stops automatically and three

flashing zeros are displayed.

The programme which has just been completed

is still in the memory and the corresponding pilot

lights stay on.

If the RINSE HOLD option has been selected,

the corresponding pilot light flashes to indicate

that the water must be emptied out before

opening the door.

The machine is fitted with a safety device that

prevents opening of the door for about 2-3

minutes after the end of the programme. The

door can only be opened after the door locked

light has gone out.

Release of the lock is indicated by an audible

signal as well as the pilot light going out.

Switch the machine off by pressing the ON/OFF

button.

Remove the laundry from the drum and carefully

check that the drum is empty so as to avoid any

forgotten items being damaged in a subsequent

wash (e.g. shrinking) or their colour running into

a load of whites.

If you do not intend to carry out another wash,

close the water tap.

Leave the door open to prevent the formation of

mildew and unpleasant smells.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 30 31

No comments

Zanussi WD15INPUT User Manual Page 21