Zanussi ZTI823 User Manual download pdf (Page 7)

ENGLISH

Unpacking

All transit bolts and packing must be removed

before using the appliance.

You are advised to keep all transit devices so that

they can be refitted if the machine ever has to be

transported again.

1. Using a spanner, unscrew and remove the rear

right-hand bolt and lay the machine on its back,

taking care not to squash the hoses. This can be

avoided by placing one of the corner packing

pieces between the machine and the floor.

2. Remove the polystyrene base and take off the

bottom panel by unscrewing the central screw.

3. Carefully remove the right-hand bag.

4. Carefully slide out the other bags.

5. Re-fit the bottom panel using the 4 screws

supplied with the door hinges (in the plastic bag)

and the previously removed screw.

P0453

P0016

P0015

P0457

P0255

6. Set the machine upright and remove the two

remaining bolts from the back.

7. Pull out the three plastic spacers from the holes

into which the bolts were fitted.

8. Plug the open holes with the plugs supplied with

the Instruction Booklet.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that the

machine does not touch the wall or other kitchen

units.

Carefully level by screwing the adjustable feet in or

out. Never place cardboard, wood or similar

materials under the machine to compensate for any

unevenness in the floor.

P1051

P0020

P0256

Installation

132995010 ZTI823.qxd 10/23/01 3:00 PM Pagina 29 (Nero/Process Black pellicola)

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Comments to this Manuals

No comments

Zanussi ZTI823 User Manual Page 7

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZTI823