Zanussi ZWD1261 User Manual download pdf (Page 18)

• Unscrew the hose from the machine. Keep a rag

nearby because some water may flow.

• Clean the filter in the valve with a stiff brush or with

the piece of cloth.

35°

45°

• Screw the hose back to the machine and make sure

the connection is tight.

• Turn on the water tap.

Frost precaution

If the machine is exposed to temperatures below 0°C,

certain precautions should be taken.

• Turn off the water tap.

• Unscrew the inlet hose.

• Place the end of the emergency emptying hose and that

of the inlet hose in a bowl placed on the floor and let

water drain out.

• Screw the water inlet hose back on and reposition the

emergency emptying hose after having put the cap on

again.

• When you intend to start the machine up again, make

sure that the room temperature is above 0°C.

Emergency emptying out

If the water is not discharged, proceed as follows to empty

out the machine:

• pull out the plug from the power socket;

• close the water tap;

• if necessary, wait until the water has cooled down;

• open the pump door;

• place a bowl on the floor and place the end of the

emergency emptying hose into the bowl. Remove its

cap. The water should drain by gravity into the bowl.

When the bowl is full, put the cap back on the hose.

Empty the bowl. Repeat the procedure until water stops

flowing out;

• clean the pump if necessary as previously described;

• replace the emergency emptying hose in its seat after

having plugged it;

• screw the pump cover again and close the door.

What to do if ...

Certain problems are due to lack of simple maintenance

or oversights, which can be solved easily without calling

out an engineer. Before contacting your local Service

Centre, please carry out the checks listed below.

During machine operation it is possible that the red pilot

light of button 7 blinks, one of the following alarm codes

appears on the display and some acoustic signals sound

every 20 seconds to indicate that the machine is not

working:

•

: problem with the water supply.

•

: problem with the water draining.

•

: door open.

Once the problem has been eliminated, press the button

7 to restart the programme. If after all checks, the problem

persists, contact your local Service Centre.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comments to this Manuals

No comments

Zanussi ZWD1261 User Manual Page 18

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWD1261