Zanussi ZWF81663W User Manual download pdf (Page 17)

If the appliance is overloaded,

remove some items from the

drum and/or keep pressed the

door and push the button at

the same time until the indicator

stops flashing (see the

picture below).

• - The mains supply is unstable. Wait

until the mains supply is stable.

• - No communication between

electronic elements of the appliance. Switch

off and switch on again. The programme was

not finished properly or the appliance

stopped too early. If the alarm code appears

again, contact the Authorised Service

Centre.

WARNING!

Deactivate the appliance before you

do the checks.

Possible failures

Problem Possible solution

The programme does not

start.

• Make sure that the mains plug is connected to the mains socket.

• Make sure that the appliance door is closed.

• Make sure that there is not a damaged fuse in the fuse box.

• Make sure that the Start/Pause has been pressed.

• If the delay start is set, cancel the setting or wait for the end of count-

down.

• Deactivate the Child Lock function if it is on.

The appliance does not fill

with water properly.

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not too low. For

this information, contact your local water authority.

• Make sure that the water tap is not clogged.

• This problem may be caused by the filter of the inlet hose or the valve

drain filter which may be clogged. Refer to “Care and cleaning”. If

problem remains please contact the Authorised Service Centre.

• Make sure that the inlet hose has no kinks or bends.

• Make sure that the connection of the water inlet hose is correct.

The appliance does not drain

the water.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Make sure that the connection of the drain hose is correct.

• Set the drain option if you set a programme without drain phase.

• Set the drain option if you set an option which ends with water in the

drum.

• This problem may be caused by the clogged drain filter. Please con-

tact the Authorised Service Centre.

www.zanussi.com 17

1 2 ... 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Zanussi ZWF81663W User Manual Page 17

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWF81663W