ENUser manualWashing MachineZWG 580PZWG 5100PZWG 5120P
The drain hose may be extended to a maxi-mum of 4 metres. An additional drain hoseand joining piece is available from your LocalCentre.Connections ove
• Before the first wash, run a cotton cycleat the highest temperature without anylaundry in the machine, to remove anymanufacturing residue from the d
Open the door by carefully pulling thedoor handle outwardsLoad the laundryPlace the laundry inthe drum, one item ata time, shaking themout as much as
Warning! Depending on the typedetergent you use (powder of liquid),ensure that the flap, placed in the main washcompartment, is in the desired positio
Measure out the fabric softenerPour fabric softeneror any additives intothe compartmentmarked (do notexceed the «MAX»mark in the drawer).Any additive
1Programme selector dialTurn the programme selector dial to the required programme.The selector dial can be turned either clockwise or counter-clockwi
4Delay Start4h8hThe start of the programme can be delayed by 8 or 4 hours by meansof this button. The relevant light illuminates.You must select this
6Start/PauseStart the programme by pressing the button 6•To start the selected programme, press the button 6, the corre-sponding green pilot light sto
Stand by: during programme setting upand once the programme has finished, ifthe programme selector dial and any button arenot touched, after a few min
Programme - Maximum and Minimum Temperature -Cycle Description - Maximum Spin Speed - MaximumFabrics Load - Type of LaundryOptionsDetergentCompartment
ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _
Programme - Maximum and Minimum Temperature -Cycle Description - Maximum Spin Speed - MaximumFabrics Load - Type of LaundryOptionsDetergentCompartment
According to regulation 1061/2010, the “COTTON ECONOMY 60 °C” and “COTTON ECONOMY 40 °C”are respectively the “standard 60 °C cotton programme” and the
Care and cleaningWarning! Switch the appliance off and re-move the mains plug from the socket beforeany cleaning action.Maintenance WashWith the use o
• open the filter cov-er by pressing thespecial hook andby rotating the cov-er upwards;Warning! Keepthe filter coveropen until the filter re-moval.• b
What to do if…The appliance does not start or stops duringoperation. Certain problems are due to lack ofsimple maintenance or oversights, which canbe
The light of button 6flashes and the light7.2 illuminates:Problem with the wa-ter drainageThe drain hose is squashed or kinked.• Check the drain hose
Malfunction Possible cause / SolutionThe appliance does notstart:The plug is not properly inserted in the power socket.• Insert the plug into the powe
Malfunction Possible cause / SolutionSpinning starts late orthe appliance does notspin:The electronic unbalance detection device has cut in because th
www.zanussi.com/shop 192991761-B-302012
• Obey the maximum load volume of 6 kg (refer to the “Programmechart” chapter). Safety instructionsInstallation• Remove all the packaging and the tran
the Service to ensure which accessories canbe used.Care and CleaningWarning! Risk of injury or damage to theappliance.• Do not use water spray and ste
Packaging materialsThe materials marked with the symbol arerecyclable.>PE<=polyethylene>PS<=polystyrene>PP<=polypropyleneThis means
Child safety deviceTo activate this device, rotate the button(without pressing it) inside the door clockwiseuntil the groove is horizontal. If necessa
Warning! Remove and keep alltransit devices so that they can be re-fitted if the appliance ever has to be transpor-ted again.Necessary tools10 mm30 mm
• Unscrew the three bolts and remove thehose holders.• Slide out the relevant plastic spacers.Warning! Donot removethe drain hosefrom the rear sup-por
Water inletConnect the hose toa tap with a 3/4”thread.35°45°Loosen the ring nut to angle the hose to theleft or right depending on the position of you
Comments to this Manuals