Zanussi ZWG6100K User Manual download pdf (Page 13)

Troubleshooting

The start of the appliance does not occur or the

appliance stops during operation.

First try to find a solution to the problem (refer

to the table). If not, contact the Service.

During appliance operation it is possible that

the red indicator of button Start flashes and

one of the indicators comes on, to show that

the appliance does not operate:

•

: the appliance does not fill with water.

•

: the appliance does not drain the water.

•

: the appliance door is open or not

closed correctly.

Problem Possible solution

The appliance does not

start.

Make sure that the mains plug is connected in the mains socket.

Make sure that the appliance door is closed.

Make sure that there is not a damaged fuse in the household fuse box.

Make sure that the button Start/Pause has been pressed.

If the delay start is set, cancel the setting or wait for the end of the countdown.

Make sure that the programme knob is in the correct position.

Deactivate the Child Lock function if it is on.

The appliance does not

fill with water.

Make sure that the water tap is opened.

Make sure that the pressure of the water supply is not too low. For this informa-

tion, contact your local water authority.

Make sure that the water tap is not clogged.

Make sure that the filter of the inlet hose and the filter of the valve are not clogged.

Refer to 'Care and cleaning'.

Make sure that the inlet hose has no kinks or bends.

Make sure that the connection of the water inlet hose is correct.

The appliance does not

drain the water.

Make sure that the sink spigot is not clogged.

Make sure that the water drain hose has no kinks or bends.

Make sure that the connection of the water drain hose is correct.

Set the drain programme if you set a programme without the drain phase.

Set the drain programme if you set an option which ends with water in the drum.

If above mentioned solutions do not help, contact the Service (as the filter of the

drain pump may be clogged).

The spin phase does

not operate

the washing cycle lasts

longer than usually.

Adjust manually the items in the drum and start the spin phase again. This problem

may be caused by balance problems.

Set the spin programme.

www.zanussi.com

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments

Zanussi ZWG6100K User Manual Page 13

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWG6100K