Zanussi ZWH7100V User Manual download pdf (Page 14)

3. 4.

7. 8.

10.

Emergency drain

Because of a malfunction, the appliance cannot

drain the water.

If this occurs, do steps (1) through (9) of 'To

clean the drain pump'.

If necessary, clean the pump.

When you drain the water with the emergency

drain procedure, you must activate again the

drain system:

1. Put 2 litres of water in the main wash com-

partment of the detergent dispenser.

2. Start the programme to drain the water.

Frost precautions

If the appliance is installed in an area where the

temperature can be less than 0 °C, remove the

remaining water from the inlet hose and the

drain pump.

1. Disconnect the mains plug from the mains

socket.

2. Close the water tap.

3. Remove the water inlet hose

4. Put the two ends of the inlet hose in a con-

tainer and let the water flow out of the

hose.

5. Empty the drain pump. Refer to the emer-

gency drain procedure

6. When the drain pump is empty, install the

inlet hose again.

Warning! Make sure that the temperature

is more than 0 °C before you use the

appliance again.

The manufacturer is not responsible for

damages caused by low temperatures.

Troubleshooting

The start of the appliance does not occur or it

stops during operation.

First try to find a solution to the problem (refer

to the table). If not, contact the service centre.

With some problems, the acoustic signals

operate and the display shows an alarm

code:

•

- The appliance does not fill with water.

•

- The appliance does not drain the wa-

ter.

www.zanussi.com

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Zanussi ZWH7100V User Manual Page 14

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWH7100V