Zanussi ZWH7100V User Manual download pdf (Page 3)

General Safety

• Before maintenance, deactivate the appliance and disconnect the

mains plug from the mains socket.

• Do not change the specification of this appliance.

• Obey the maximum load volume of 7 kg (refer to the “Programme

chart” chapter).

Safety instructions

Installation

• Remove all the packaging and the transit

bolts.

• Keep the transit bolts. When you move the

appliance again you must block the drum.

• Do not install or use a damaged appliance.

• Do not install or use the appliance where the

temperature is less than 0 °C or where it is

exposed to the weather.

• Obey the installation instruction supplied

with the appliance.

• Make sure that the floor where you install the

appliance is flat, stable, heat resistant and

clean.

• Do not install the appliance where the appli-

ance door can not be fully opened.

• Always be careful when you move the appli-

ance because it is heavy. Always wear safety

gloves.

• Make sure that there is air circulation be-

tween the appliance and the floor.

• Adjust the feet to have the necessary space

between the appliance and the carpet.

Electrical connection

Warning! Risk of fire and electrical shock.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power sup-

ply. If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and exten-

sion cables.

• Make sure not to cause damage to the mains

plug and to the mains cable. Should the ap-

pliance power supply cable need to be re-

placed, this must be carried out by our Serv-

ice Centre.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Do not touch the mains cable or the mains

plug with wet hands.

• This appliance complies with the E.E.C. Di-

rectives.

Water connection

• Make sure not to cause damage to the water

hoses.

• The appliance is to be connected to the wa-

ter mains using the new supplied hose-sets.

Old hose sets must not be reused.

• Before you connect the appliance to new

pipes or pipes not used for a long time, let

the water flow until it is clean.

• The first time you use the appliance, make

sure that there is no leakage.

Use

Warning! Risk of injury, electrical shock,

fire, burns or damage to the appliance.

www.zanussi.com

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

Zanussi ZWH7100V User Manual Page 3

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWH7100V