Zanussi ZWI71000WA User Manual download pdf (Page 17)

Problem Possible solution

The washing results are

not satisfactory.

• Increase the detergent quantity or use a different detergent.

• Use special products to remove the stubborn stains before you

wash the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

You cannot set an option. • Make sure that you press only the wanted button(s).

After the check, activate the appliance. The

programme continues from the point of interruption.

If the problem occurs again, contact the Authorised

Service Centre.

If the display shows other alarm codes. Deactivate

and activate the appliance. If the problem

continues, contact the Service.

SERVICE

We recommend the use of original spare parts.

When contacting the Authorised Service Centre,

make sure that these data are available. You can

find the information on the rating plate: model

(Mod.), PNC (Prod.No.), Serial number (Ser.No.).

INSTALLATION

WARNING! Refer to Safety chapters.

CLEANING THE INLET HOSE AND THE VALVE

FILTER

Remove all transit bolts and packing

before you use the appliance. You are

advised to keep all transit devices so t

hat they can be refitted if the appliance

ever has to be transported again.

• After removing all the

packaging, carefully

lay the appliance on

it’s back to remove

the polystyrene base

from the bottom.

• Remove the power

supply cable and the

draining hose from the

hose holders on the

rear of the appliance.

• Unscrew the three

bolts.

• Slide out the relevant

plastic spacers.

• Remove the

polystyrene block

fitted on the door seal.

Pull out all items from

the drum.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Zanussi ZWI71000WA User Manual Page 17

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWI71000WA