Zanussi ZWP581 User Manual download pdf (Page 6)

Daily use

Loading washing

• Open the lid of the

appliance.

• Open the drum by

depressing the

locking button A:

The two shutters

unlock automati-

cally.

• Load the washing,

close the drum and the lid of your washing

machine.

Warning! Before closing the lid of your

appliance, ensure that the drum is properly

closed :

• When the two shutters are closed,

• locking button A released.

Proportioning of detergents

Pour the amount of washing into the washing

and prewash compartments if you have

selected the “prewash” option. Pour fabric soft-

ener into the compartment

if necessary.

Selection of desired programme

Turn the programme selector to the required

programme. The “Start/Pause”

pushbutton

flashes green.

If you turn the programme selector to another

programme while a cycle is in progress, the ap-

pliance will ignore the new selected pro-

gramme. The “Start/Pause”

pushbutton

flashes red for a few seconds.

Selecting the spin speed

Press the “Spin”

button to change the spin

speed, if you want your washing to be spun at a

different speed to the one selected by the appli-

ance. You can also select the “Rinse hold”

option.

For the maximum spin speeds see "Washing

programmes".

Rinse hold

By selecting this function the water of the last

rinse is not emptied out to prevent the fabrics

from creasing.

A

At the end of the programme, if you have selec-

ted the “Rinse hold”

, you then need to se-

lect a “Spin”

or “Drain” programme to fin-

ish the cycle and empty the water.

Selecting options

You must select the different options after se-

lecting the programme and before pressing the

“Start/Pause”

pushbutton (see “Programmes

table”). Press the desired button(s) : the corre-

sponding lights come on. If pressed again, the

lights go out. If one of the options is not com-

patible with the selected programme, the “Start/

Pause”

pushbutton flashes red.

“Prewash” option

The appliance runs a prewash at 30°C max.

“Quick” option

The washing time will be reduced depending on

the programme selected.

“Extra Rinse” option

The washing machine will add one or more rin-

ses during the cycle. This option is recommen-

ded for people with sensitive skin and in soft

water areas.

“Delay start”

This option allows you to delay the start of a

wash programme by 3, 6 or 9 hours by pressing

the “Delay start”

pushbutton.

You can change or cancel the delayed start

time at any time before you press the “Start/

Pause”

pushbutton by pressing the “Delay

start”

pushbutton again (when all indicators

are off, the wash programme will start immedi-

ately).

If you have already pressed the “Start/Pause”

pushbutton and you want to change or can-

cel the delayed start, proceed as follows :

• To cancel the delay start and start the cycle

immediately, press “Start/Pause”

and then

“Delay start”

. Press “Start/Pause” to

start the cycle.

6

www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments