Zanussi ZWS2121 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
If the temperature and level of the water in the drum
are too high, you cannot open the door.
To open the appliance door:
Do the steps 1 and 2 again.
Wait for some minutes.
Make sure that no water is in the drum.
At the end of the programme
The appliance stops automatically.
The start button indicator flashes or the End indicator
is on.
Turn the programme knob to
to deactivate the ap-
pliance.
Remove the laundry from the appliance. Make sure that
the drum is empty.
Keep the door ajar, to prevent mildew and odours.
Close the water tap.
The washing programme is completed, but there is water
in the drum:
The Rinse Hold option or a programme that stops with
water in the drum is set.
The door stays locked and the start button indicator
flashes.
You must drain the water before to open the door.
To drain the water:
1. If the spin speed option is available, you can de-
crease the spin speed.
2. Press the start button. The appliance drain the water
and spin.
3. When the programme is completed:
The start button indicator flashes or the End indi-
cator is on.
You can open the door.
4.
Turn the programme knob to
to deactivate the
appliance.
Care and cleaning
Warning!
Disconnect the appliance from the mains supply before
you clean it.
External cleaning
Clean the appliance only with soap and warm water. Fully
dry all the surfaces.
Caution! Do not use alcohol, solvents or chemical
products.
Descaling
The water we use contains limescale. If it becomes neces-
sary, use a water softener to remove limescales.
Use a special product made for washing machines. Obey
the instructions that you find on the packaging of the
manufacturer.
Do this separately from the laundry wash.
Maintenance wash
With the low temperature programmes it is possible that
some detergent stays in the drum. Make regularly a main-
tenance wash. To do this:
Empty the laundry from the drum.
Set the hottest cotton wash programme
Use a correct quantity of powder detergent with biolog-
ical properties.
After each wash, keep the door open for a while to prevent
mould and to let unpleasant smells go out.
Drum
Regularly examine the drum to prevent limescale and rust
particles.
Only use special products to remove rust particles from
the drum.
To do this:
Clean the drum with special product for stainless steel.
Start a short programme for cotton at the maximum
temperature with a small quantity of detergent.
11
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments