Zanussi ZWSF7100SS User Manual download pdf (Page 18)

Problem Possible solution

There is water on the floor. • Make sure that the couplings of the water hoses are tight and there

is not water leakages.

• Make sure that the drain hose have no damages.

• Make sure you use the correct detergent and the correct quantity of

it.

You cannot open the appli-

ance door.

• Make sure that the washing programme is finished.

• Set the drain or the spin programme if there is water in the drum.

The appliance makes an

unusual noise.

• Make sure the levelling of the appliance is correct. Refer to 'Installa-

tion'.

• Make sure that the packaging and/or the transit bolts are removed.

Refer to 'Installation'.

• Add more laundry in the drum. The load may be too small.

The cycle is shorter than

the time displayed.

The appliance calculates a new time according to the laundry load.

See the ‘Consumption Values’ chapter.

The cycle is longer than

the time displayed.

An unbalanced laundry load increases the duration time. This is a nor-

mal behaviour of the appliance.

The washing results are

not satisfactory.

• Increase the detergent quantity or use a different detergent.

• Use special products to remove the stubborn stains before you

wash the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

You cannot set an option. • Make sure that you press only the wanted button(s).

After the check, activate the appliance. The

programme continues from the point of interruption.

If the problem occurs again, contact the Authorised

Service Centre.

If the display shows other alarm codes. Deactivate

and activate the appliance. If the problem

continues, contact the Service.

SERVICE

We recommend the use of original spare parts.

When contacting the Authorised Service Centre,

make sure that these data are available. You can

find the information on the rating plate: model, PNC

and Serial Number. (Mod., Prod. No., Ser. No.)

TECHNICAL DATA

Dimension Width/ Height/ Depth/ To-

tal depth

595 mm / 850 mm / 380 mm / 420 mm

Electrical connection Voltage

Overall power

Fuse

Frequency

230 V

2000 W

10 A

50 Hz

Level of protection against ingress of solid particles and

moisture ensured by the protective cover, except where

the low voltage equipment has no protection against

moisture

IPX4

Water supply pressure Minimum

Maximum

0,5 bar (0,05 MPa)

8 bar (0,8 MPa)

1 2 ... 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Zanussi ZWSF7100SS User Manual Page 18

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWSF7100SS