Zanussi Dishwasher User Manual download pdf (Page 11)

Activate or deactivate the multitab function before

the start of a washing programme.

You cannot activate or deactivate the multitab function

when the programme operates. Cancel the washing pro-

gramme, then set the programme again.

To activate the multitab function:

• Press the multitab button. The multitab indicator light

comes on.

To deactivate the multitab function:

• Press the multitab button. The multitab indicator light

goes off.

Do these steps if the drying results are not satis-

factory:

1. Fill the rinse aid dispenser with rinse aid.

2. Activate the rinse aid dispenser.

3. Set the rinse aid dosage to position 2.

• You can only activate or deactivate the rinse aid dis-

penser when the multitab function is activated.

To activate/deactivate the rinse aid dispenser:

The appliance must be switched off.

1. Press and hold the start/cancel button. Turn the pro-

gramme knob counterclockwise until the programme

marker agrees with the first washing programme on

the control panel.

2. Release the start/cancel button when the display

shows the water hardness level.

3. Turn the programme knob counterclockwise until the

programme marker agrees with the second washing

programme on the control panel.

4. The digital display shows the current setting for the

rinse aid dispenser.

Rinse aid dispenser deac-

tivated

Rinse aid dispenser activa-

ted

5. Press the start/cancel button to change the setting.

The digital display shows the new setting.

6. Turn the programme knob to the off position to save

the operation.

To use normal detergent again:

1. Deactivate the multitab function.

2. Fill the salt container and rinse aid dispenser.

3. Adjust the water hardness setting to the highest level.

4. Do a washing programme without dishes.

5. Adjust the water softener to the water hardness in your

area.

6. Adjust the rinse aid dosage.

Select and start a washing programme

Do these steps to set and start a washing programme:

1. Close the door.

2. Turn the programme knob to set the washing pro-

gramme. Refer to the chapter 'Washing programmes'.

– The phase indicator light or lights for the washing

programme come on.

– The programme duration in the digital display

flashes.

3. Press the start/cancel button.

– The washing programme starts automatically.

– When the programme starts, only the indicator

light of the phase in progress stays on. Programme

duration is on with a static light.

When the washing programme operates, you cannot

change the programme. Cancel the washing pro-

gramme.

Warning! Only interrupt or cancel a washing

programme if necessary.

Caution! Open the door carefully. Hot steam can

come free.

Interrupting a washing programme

Open the door.

• The programme stops.

Close the door.

• The programme continues from the point of interrup-

tion.

Cancelling a washing programme

• Press and hold the start/cancel button.

– In the digital display the time duration of the pro-

gramme flashes.

– One or more phase indicator lights are on.

Downloaded from DishWasher-Manual.com Manuals

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

Zanussi Dishwasher User Manual Page 11

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi Dishwasher