Zanussi ZDTS101 User Manual

User manualDishwasherZDTS 101

1. Press the On/Off button. The appliancemust be in setting mode.2.Press and hold Programme selection/Cancel button until programme light Aflashes and

Remove any trace of salt. Replace the cap tightlyturning it clockwise until itstops with a click.IMPORTANT!Immediately start a complete programme.IMPO

Top up the rinse aid indica-tor (B) becomes clearCAUTION!Never fill the rinse aid dispenser with any other substances (e.g. dishwashercleaning agent,

– To avoid damage to glasses, they mustnot touch.– Lay small objects in the cutlery basket.• Plastic items and pans with non stick coat-ings have a te

Load upper basket. Lightitems (plastic bowls etc.)must be loaded in the up-per basket and arrangedso they do not move.For taller items, the cupracks c

Use of detergentIMPORTANT!Only use detergents suitable for dishwashers.Observe the manufacturer’s dosing and stor-age recommendations.Open the lid.Fil

• Water may appear on the sides and the doorof the dishwasher as the stainless steel willeventually become cooler than the dishes. CAUTION!When the w

External cleaningClean the external surfaces of the machine andcontrol panel with a damp soft cloth. Ifnecessary use only neutral detergents. Neveruse

ponents are identified by markings, e.g. >PE<,>PS<, etc. Please dispose of the packagingmaterials in the appropriate container at thecommu

Fault code and malfunction Possible cause and solutionThe programme does not start. • The dishwasher door has not been properly closed.Close the door.

Thank you for selecting ourapplianceWe wish you lots of enjoyment with your newappliance and we hope that you will considerour brand again when purcha

The wash results are not satisfactoryThere are streaks, milky spots or a bluish coating onglasses and dishes• Decrease rinse aid dosing.Water drops ha

Consumption valuesProgramme Programme duration (inminutes)Energy consumption (inkWh)Water (litres)Rinse and Hold11 0,1 51) Test programme for Test Ins

cup racks: position ALower basketInstallation WARNING!Any electrical and/or plumbing work required toinstall this appliance should be carried out by

WARNING!The electrical cable for the safety valve is in thedouble-walled water inlet hose and is live.Therefore do not immerse the water inlet hoseo

Electrical connection CAUTION!Safety standards require the appliance to beearthed.Prior to using the appliance for the first time,ensure that the rat

25

26

27

www.electrolux.comwww.zanussi-electrolux.co.uk117972110-012008

Safety informationIn the interest of your safety and to ensure thecorrect use, before installing and first using theappliance, read this user manual

Installation• Check your dishwasher for any transportdamage. Never connect a damaged ma-chine. If your dishwasher is damaged con-tact your supplier.•

Setting modeThe appliance is in setting mode when allprogramme lights are off and End of pro-gramme light flashes.IMPORTANT!Always remember that when

Indicator lightsEnd of programme indicator lightIlluminates when the washing programme has ended.It also has added functions of visual signalling as:

–End of programme light illuminateswith fixed light, indicating that the audi-ble signals are active.5. To deactivate the audible signals pressagain t

First useBefore using your dishwasher for the first time:• Ensure that the electrical and water connec-tions comply with the installation instructions

Water hardness Adjusting the water hardnesssettingUse of saltClarke °TH mmol/l manually electronically64 - 88 91 - 125 9,0- 12,5 2 level 10 yes53 - 63